OPPO-A39-Fix-Unbrick

ROM unbrick, fix black screen error, power ONLY vibrate for OPPO A39 (Neo 9s)
Previously I shared a post about how to clear screen passwords for OPPO A39 (Neo) by simply flashing the Userdata and Cache files using flashtool. However, many people do not read the instructions to flash full and the machine is bricked up, only vibrate.
Today continues to share to everyone how to fix. How do you see the below will see clearly;))
DOWNLOAD: (Google Drive link)

• OPPO-A39-Fix-Unbrick.7z (1.2G)

GUIDE:

1. Download ROM and extract a folder containing ROM, driver, flashtool sp
   
2. Proceed to extract the driver file ( Mediatek_Driver_Auto_Installer_1.1352.00.7z ) and run the file as shown below to install the driver.
   
3. Unzip SP Flashtool and run  flash_tool.exe
   
   
4. Here comes the main step:
   In Flashtools, click  Choose in the Scatter-loading File and select the file  MT6750_Android_scatter_ official .txt in target_bin, revert to " Format All + Download ", then select Download.  (With blue arrows)
   
   
5. Turn off the phone, press and hold the VOLUME UP button  and plug the cable connected to the computer, wait a bit for the flash tool will finish OK blue. At this time the machine is still brick, but rest assured and continue.
6. Repeat the above step, but this time turn on the tool and select the file  MT6750_Android_scatter_ edit .txt in target_bin,  uncheck " BYPASS" , then select Download  (with blue arrow)
   
   
7. Continue to turn off the phone, press and hold the VOLUME UP key  while plugging the cable connected to the computer, waiting for the flash to succeed will indicate OK blue.
8. Repeat this step, but this time turn on the tool and select the file MT6750_Android_scatter manual .txt  in the target_bin directory . In the Location section of the preloader,  click on the preloader.bin file ( in the target_bin directory ). Next, in the Location section of the system,  click on the crooot.bin file ( in the target_bin folder ),  then select Download  (there is a blue arrow).
   
9. Continue to turn off the phone, press and hold the VOLUME UP key  while plugging the cable connected to the computer, waiting for the flash to succeed will indicate OK blue.
10. After the tool says OK then unplug the cable, turn on the machine, activate and check the imei. If you lose imei then download the rom zip flash recovery is oke (Who do not know how to download the zip rom, then leave comment underneath it update, lazy to download too: D)

• Tweet
• Share
• Share
• Share
• Share